DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 73 / 132

DHS Systems, LLC TM 95236-00 0006
0006-11
No rights are conveyed except as indicated in the legend on the cover of this document.
Initiate an Audio Conference
. Press and hold the Audio Conference button (Figure 11, Item 1) to access the Audio Conference panel and
2. Type in the phone number to be called, or press the mber button coinciding to a stored preset. Refer to
Table 3. Call Key Functions.
Call Key Function
1
the necessary controls to run the audio conference.
nu
Table 3 for special keys.
Call Key Function
1 – 9 Normal dial keys Redial Redials last call made
Pause pause in the dialing Enters a 5 second Hang Up Disconnects Call
Back
Space
Removes last entered numeric character Flash See note on previous page
Call
Connects the call using the number
entered
. Select the CALL button once the phone number has been correctly input.
. Conduct the teleconference, if using three way calling, execute the call IAW the phone service provider’s
. When the teleconference is finished, press Hang Up button to disconnect the call.
NOTE
User must manually Press the Hang Up button after each teleconference call. The system will
. Reactivate any audio inputs desired IAW the steps in the Audio Setup section of this work package.
3
4
instructions using the Flash button to signal the request.
5
NOT hang up even if the remote end has disconnected.
6
Figure 11. Audio Conference Function Panel.
ASK END OF T