DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 83 / 132

DHS Systems, LLC TM 95236-00 0006
0006-21
No rights are conveyed except as indicated in the legend on the cover of this document.
Disconnect and Store the Speaker
1. Turn of power supply to Speaker system and unplug from power source.
2. Unplug power cable from rear of speaker.
3. Unplug RCA cable from rear of speaker.
4. Store Speaker in appropriate section of the ancillary equipment transport case.
5. Roll and store the speaker-to-speaker cable in the large storage section of the ancillary equipment transport
case.
END OF TASK
Disconnect and Store the Touch Panel
1. Remove the Touch Panel cable from the AVCS (MINI) rear panel by rotating the locking ring counterclockwise
until it releases and then separate the cable from the AVCS (MINI) connector.
2. Remove the Touch Panel cable from the AVCS (MINI) Touch Panel by rotating the locking ring
counterclockwise until it releases and then separate the cable from the Touch Panel.
3. Store the Touch Panel and cable in the ancillary equipment transport case in its designated compartment.
END OF TASK
Disconnect and Store the AVCS (MINI)
1. Disconnect the AVCS (MINI) power cable from the power source.
2. Remove the power cable from the bottom of the AVCS (MINI) and store in the ancillary equipment transport
case main storage compartment.
3. Loosen the ground cable terminal lug and remove the ground cable from the AVCS (MINI). Replace the
ground cable terminal lug and store the ground cable in the ancillary equipment transport case.
4. Remove any HD-15 cables connected to the back of the AVCS (MINI) but turning the locking screws counter
clockwise until the connectors are released. Roll cables and store in either their respective component transit
cases or in the main section of the ancillary equipment transport case.
5. If used, disconnect any co-axial cables from the AVCS (MINI) rear panel by rotating their locking rings counter
clockwise to unlock and removing from the BNC connector. Roll cables and store in either their respective
component transit cases are in the main section of the ancillary equipment transport case.
6. If used, disconnect any XLR input cables from the AVCS (MINI) rear panel, by pressing the locking tab in on
the panel to release the connector, and pull away from the XLR connector. Roll cables and store in either
their respective component transit cases are in the main section of the ancillary equipment transport case.
7. If used, disconnect any XLR output cables from the AVCS (MINI) rear panel, by pressing down on the locking
tab on the cable to release the connector, and remove from the XLR connector. Roll cables and store in
either their respective component transit cases or in the main section of the ancillary equipment transport
case.
8. Replace any dust covers that were removed during use.
9. Position the front cover on the front of the AVCS (MINI).