DHS Systems TM 95263 00, Operation And Maintenance Manual

Page: 67 / 132

DHS Systems, LLC TM 95236-00 0006
0006-5
No rights are conveyed except as indicated in the legend on the cover of this document.
OPERATE THE AVCS
Recall Presets
The AVCS (MINI) stores four Presets in its internal flash memory. The Preset contains all the information
needed to restore the system to a predetermined setup. These presets will remain after the system has
been shut down. Setting up and labeling Presets is addressed later in this WP.
1. Select the Preset button (Figure 5, Item 1) to access the Preset Control Group.
1
Figure 5. Select Preset Control Group.
3. The Main Display page will change to show four Preset control buttons shown in Figure 6.
Figure 6. Preset Screen.
4. To view or change individual Presets, press the preset button coinciding to the desired Preset desired.
5. The Main Display will display a Wait message while the AVCS retrieves the specific Preset settings
6. Observe the Control Panel has reverted to the Main Setup Page (Figure 4). Note that adjusting presets is
covered in back of this Work Package.
END OF TASK