EN
41
DHOLLANDIA
Fig. 6.9 - Operation of DH-AR1...
N°
Opening the platform
1
Consult the user’s manual before getting started.
2
Switch on the electrical power to the ramp (dashboard
switch in the driver’s cabin, and battery switch in the
control box).
3
Open the platform lock.
4
LEG OUT : remove the locking pin from the stabilising
legs, and lower them into work position. Or: lower and
block the air suspension of the vehicle.
5
OPEN WITH MOTOR : start to open the platform with
assistance of the motor + pump.
6
OPEN : continue to open the platform by means of the
gravity of its own weight, until the platform point and
the mechanical support legs under the platform rest
firmly on the ground.
N° Loading
&
unloading
7
Load & unload following the user’s instructions and
loading diagrams.
N°
Closing up in travel position
8
CLOSE : close the platform into it’s travel position.
9
LEG IN : raise the stabilising legs into their travel posi-
tion, and mount the locking pin. Or: reset the vehicle
suspension in neutral position.
10
Close the platform lock.
11
Switch off the electrical power (see 2).
6.9
§6.3 - Operating instructions for 2-cylinder ramps DH-
AR1...
•
The hydraulic ramps DH-AR1... have a non-articulated
platform. They are operated as follows:
6.1 / 6.2
1 2
3 4
5
6
7
8
9
10 11
Summary of Contents for DH-AR1 Series
Page 58: ...DHOLLANDIA 58 8 2 ...
Page 59: ...DHOLLANDIA 59 8 3 ...
