Develop ineo 4020 User Manual Download Page 32

Page: 32 / 365

User's Guide

- 32 -

2. Unpack the memory card.

Warning—Potential Damage:

Do not touch the connection points along the edge of the card. Doing

so may cause damage.

3. Align the notch (1) on the memory card with the ridge (2) on the connector.

4. Push the memory card straight into the connector, and then push the card toward the controller board

wall until it

clicks

into place.

5. Close the controller board shield, and then the controller board access door.

Note:

When the printer software and any hardware options are installed, you may need to manually

add the options in the printer driver to make them available for print jobs. For more information, see

Updating available options in the printer driver

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands