Develop ineo 4020 User Manual Download Page 351

Page: 351 / 365

User's Guide

- 351 -

Action

Yes

Step 5

From the Flash Drive menu, reduce

the scan resolution settings, and

then resend the scan job.

Does the job scan?

The problem is solved.

Go to step 6.

Step 6

Check the scan settings.

From the Scan screen, make

sure the Content Type and

Content Source settings are

correct for the document being

scanned.

Are the Content Type and Content

Source settings correct for the

document being scanned?

The problem is solved.

Change the Content Type and

Content Source settings to match the

document being scanned.

Scanner unit does not close

Action

Yes

Check if there are obstructions in the scanner unit.

Lift the scanner unit.

Remove any obstruction keeping the scanner unit open.

Lower the scanner unit.

Did the scanner unit close correctly?

The problem is solved. Contact

technical support

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands