Develop ineo 4020 User Manual Download Page 50

Page: 50 / 365

User's Guide

- 50 -

2. Add any installed hardware options, and then click

Attaching cables

CAUTION—POTENTIAL INJURY:

Do not use the fax feature during a lightning storm. Do not set up

this product or make any electrical or cabling connections, such as the fax feature, power cord, or

telephone, during a lightning storm.

Connect the printer to the computer using a USB cable or to the network using an Ethernet cable.

Make sure to match the following:

•

The USB symbol on the cable with the USB symbol on the printer

•

The appropriate Ethernet cable with the Ethernet port

Use the

Printer power cord socket

Connect the printer to a properly grounded electrical

outlet.

Power switch

Turn the printer on or off.

Ethernet port

Connect the printer to an Ethernet network.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands