Develop ineo 4020 User Manual Download Page 207

Page: 207 / 365

User's Guide

- 207 -

Use

E-mail Bit Depth

1 bit
8 bit

Enable the Text/Photo mode to produce smaller file sizes by using 1-bit images.

Note:

“8 bit” is the factory default setting.

Custom Job scanning

On
Off

Copy a document that contains mixed paper sizes.

Notes:

•

Off is the factory default setting.

•

This menu item appears only when a formatted, working printer hard disk is

installed.

Scan Preview

On
Off

Specify whether or not a preview will appear on the display for scan jobs.

Notes:

•

Off is the factory default setting.

•

This menu item appears only when a formatted, working printer hard disk is

installed.

Allow Save as Shortcut

On
Off

Save e-mail addresses as shortcuts.

Notes:

•

On is the factory default setting.

•

When set to Off, the Save as Shortcut button does not appear on the e-mail

Destination screen.

Background Removal

-4 to 4

Adjust the amount of background visible on a scanned image.

Note:

0 is the factory default setting.

Contrast

0–5
Best for content

Specify the contrast of the output.

Note:

“Best for content” is the factory default setting.

Mirror Image

Off
On

Create a mirror image of the original document.

Note:

Off is the factory default setting.

Negative Image

Off
On

Create a negative image of the original document.

Note:

Off is the factory default setting.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands