Develop ineo 4020 User Manual Download Page 356

Page: 356 / 365

User's Guide

- 356 -

Action

Yes

Step 2

Make sure the printer IP address is correct.

View the printer IP address:

From the TCP/IP section in the Network/Ports menu

By printing a network setup page or menu settings page, and then finding the

TCP/IP section

Note:

An IP address appears as four sets of numbers separated by

periods, such as 123.123.123.123.

Open a Web browser, and then type the IP address.

Note:

Depending on the network settings, you may need to type “

https://

”

instead of “

http://

” before the printer IP address to access the Embedded

Web Server.

Press

Enter

Does the Embedded Web Server open?

The

problem is

solved.

Go to step 3.

Step 3

Check if the network is working.

Print a network setup page.

Check the first section of the network setup page and confirm that the status is

Connected.

Note:

If the status is Not Connected, then the connection may be intermittent,

or the network cable may be defective. Contact your system support person

for a solution, and then print another network setup page.

Open a Web browser, and then type the printer IP address.

Press

Enter

Does the Embedded Web Server open?

The

problem is

solved.

Go to step 4.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands