Develop ineo 4020 User Manual Download Page 288

Page: 288 / 365

User's Guide

- 288 -

Standard USB port disabled [56]

From the printer control panel, select

Continue

to clear the message. For non-touch-screen printer

models, press

to confirm.

Notes:

•

The printer discards any data received through the USB port.

•

Make sure the USB Buffer menu is not set to Disabled.

Supply needed to complete job

Do either of the following:

•

Install the missing supply to complete the job.

•

Cancel the current job.

Too many flash options installed [58]

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet.

3. Remove the extra flash memory.

4. Connect the power cord to a properly grounded electrical outlet.

5. Turn the printer back on.

Too many trays attached [58]

1. Turn off the printer.

2. Unplug the power cord from the electrical outlet.

3. Remove the extra trays.

4. Connect the power cord to a properly grounded electrical outlet.

5. Turn the printer back on.

Unformatted flash detected [53]

Try one or more of the following:

•

From the printer control, select

Continue

to stop the defragmentation and continue printing. For non-

touch-screen printer models, press

to confirm.

•

Format the flash memory.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands