Develop ineo 4020 User Manual Download Page 335

Page: 335 / 365

User's Guide

- 335 -

Solving copy problems

Copier does not respond

Scanner unit does not close

Poor copy quality

Partial document or photo copies

Copier does not respond

Action

Yes

Step 1

Check if an error or status message appears on

the display.

Does an error or status message appear?

Clear the error or

status message.

Go to step 2.

Step 2

Check if the power cord is plugged into the

printer and a properly grounded electrical outlet.

Is the power cord plugged into the printer and a

properly grounded electrical outlet?

Go to step 3.

Connect the power cord to the printer

and a properly grounded electrical outlet.

Step 3

Turn off the printer, then wait for about 10

seconds, and then turn it back on.

Did

Performing Self Test

and

Ready

appear?

The problem is

solved.

Contact

technical support

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands