Develop ineo 4020 User Manual Download Page 213

Page: 213 / 365

User's Guide

- 213 -

Use

Fix Scan Skew

Auto
Off
On

Correct slight skew in the scanned image.

Notes:

•

Off is the factory default setting.

•

This menu item is supported only in select printer models.

Scan edge to edge

Off
On

Specify whether the original document is scanned edge-to-edge.

Note:

Off is the factory default setting.

Sharpness

1–5

Adjust the amount of sharpness of a scanned image.

Note:

3 is the factory default setting.

Temperature

-4 to 4

Enable the user to specify “warm” or “cool” outputs. "Cool” values generate a

bluer output than the default while “warm” values generate a redder output than

the default.

Note:

0 is the factory default setting.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands