Develop ineo 4020 User Manual Download Page 345

Page: 345 / 365

User's Guide

- 345 -

Action

Yes

Step 3

Replace the toner cartridge. For more information, see the instruction sheet that

came with the supply.

Can you receive faxes?

The problem

is solved.

Contact

technical

support

Can receive but not send faxes

Action

Yes

Step 1

Check if the printer is in Fax mode.

From the home screen, touch

Fax

to put the printer in Fax

mode, and then send the fax.

Note:

The Multi Send application

does not support the XPS output

type. To use XPS, use the regular

faxing method.

Can you send faxes?

The problem is solved.

Go to step 2.

Step 2

Load the original document properly.

Load the original document

faceup, short edge first into the

ADF tray or facedown on the

scanner glass in the upper left

corner.

Note:

Do not load postcards, photos,

small items, transparencies, photo

paper, or thin media (such as

magazine clippings) into the ADF

tray. Place these items on the

scanner glass.

Can you send faxes?

The problem is solved.

Go to step 3.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands