Develop ineo 4020 User Manual Download Page 43

Page: 43 / 365

User's Guide

- 43 -

c. Align the screws on the printer hard disk to the slots on the controller board bracket, and then

slide the printer hard disk onto the brackets.

d. Tighten the two screws.

4. Close the controller board shield, and then close the controller board access door.

Note:

When the printer software and any hardware options are installed, you may need to manually

add the options in the printer driver to make them available for print jobs. For more information, see

Updating available options in the printer driver

Removing a printer hard disk

Warning—Potential Damage:

Controller board electronic components are easily damaged by static

electricity. Touch something metal on the printer before touching any controller board electronic

components or connectors.

1. Access the controller board.

For more information, see

Accessing the controller board

Note:

This task requires a flathead screwdriver.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands