Develop ineo 4020 User Manual Download Page 354

Page: 354 / 365

User's Guide

- 354 -

Partial document or photo scans

Action

Yes

Check the placement of the document or photo.

Make sure the document or photo is loaded

facedown on the scanner glass in the upper left

corner.

Is the document or photo loaded correctly?

Contact

technical

support

Load the document or photo facedown on

the scanner glass in the upper left corner.

Cannot scan from a computer

Action

Yes

Step 1

Make sure the printer is turned on and that

Ready

appears on the

printer display before scanning a job.

Does

Ready

appear before scanning the job?

Go to step 3.

Go to step 2.

Step 2

Turn off the printer, then wait for about 10 seconds, and then turn

the printer back on.

Is there an error message on the printer display?

Clear the error

message.

Go to step 3.

Step 3

Check the cable connections between the printer and the print

server to make sure they are secure.

For more information, see the setup documentation that came

with the printer.

Are the cable connections between the printer and the print server

secure?

Contact

technical

support

Tighten the cable

connections.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands