Develop ineo 4020 User Manual Download Page 299

Page: 299 / 365

User's Guide

- 299 -

Action

Yes

Step 2

Check if the indicator light on the printer control

panel is blinking green.

Note:

A green blinking light indicates that the

printer is busy.

Is the indicator light blinking green?

Wait until the printer is ready, then view

the held jobs list, and then print the

documents.

Go to step 3.

Step 3

1. Check for an error message on the display.

2. Clear the message.

Does the error message still appear?

Go to step 4.

The problem is

solved.

Step 4

Check if the flash drive is supported.

For more information on tested and approved

USB flash drives, see

Supported flash drives

and file types

Does the error message still appear?

Go to step 5.

The problem is

solved.

Step 5

Check if the USB port is disabled by the system

support person.

Does the error message still appear?

Contact

technical support

The problem is

solved.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands