Develop ineo 4020 User Manual Download Page 31

Page: 31 / 365

User's Guide

- 31 -

Memory card connector

Option card connector

Printer hard disk connector

Internal Solutions Port connector

4. Close the shield, and then the access door.

Installing a memory card

CAUTION—SHOCK HAZARD:

If you are accessing the controller board or installing optional

hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug

the power cord from the electrical outlet before continuing. If you have any other devices attached to the

printer, then turn them off as well, and unplug any cables going into the printer.

Warning—Potential Damage:

Controller board electronic components are easily damaged by static

electricity. Touch something metal on the printer before touching any controller board electronic

components or connectors.

Note:

An optional memory card can be purchased separately and attached to the controller board.

1. Access the controller board.

For more information, see

Accessing the controller board

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands