Develop ineo 4020 User Manual Download Page 68

Page: 68 / 365

User's Guide

- 68 -

- Hold transparencies by the edges. Flex the stack of transparencies back and forth to loosen them,

and then fan them. Straighten the edges on a level surface.

Note:

Avoid touching the printable side of the transparencies. Be careful not to scratch them.

- Flex the stack of envelopes back and forth to loosen them, and then fan them. Straighten the

edges on a level surface.

4. Load the paper or specialty media.

Notes:

- Do not force paper or specialty media into the multipurpose feeder.

- Make sure the paper or specialty media is below the maximum paper fill indicator located on the

paper guides. Overfilling may cause paper jams.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands