Develop ineo 4020 User Manual Download Page 301

Page: 301 / 365

User's Guide

- 301 -

Action

Yes

Step 5

1. Turn off the printer, then wait for about 10 seconds, and then turn the

printer back on.

2. Resend the print job.

Do the jobs print?

The problem is

solved.

Go to step 6.

Step 6

1. Remove, and then reinstall the printer software. For more information,

see

Installing the printer driver

2. Resend the print job.

Do the jobs print?

The problem is

solved.

Contact

technical

support

Confidential and other held jobs do not print

Note:

Confidential, Verify, Reserve, and Repeat print jobs may be deleted if the printer requires extra

memory to process additional held jobs.

Action

Yes

Step 1

Open the held jobs folder on the printer

display, and then verify that your print

job is listed.

Is your print job listed in the held jobs

folder?

Go to step 2. Select one of the Print and Hold options, and then resend

the print job. For more information, see

Printing

confidential and other held jobs

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands