User's Guide
- 193 -
Use
To
Enable Manual Fax
On
Off
Set the printer to fax manually, which requires a line splitter and a telephone
handset.
Notes:
•
Off is the factory default setting.
•
Use a regular telephone to answer an incoming fax job and to dial a fax
number.
•
Press
# 0
on the numeric keypad to go directly to the Manual Fax function.
Memory Use
All receive
Mostly receive
Equal
Mostly send
All send
Define the allocation of non-volatile memory between sending and receiving fax
jobs.
Notes:
•
Equal is the factory default setting. This splits the memory for sending and
receiving fax jobs into equal amounts.
•
“Mostly send” specifies that most of the memory is set to send fax jobs.
•
“All send” specifies that all the memory is set to send fax jobs.
•
“All receive” specifies that all the memory is set to receive fax jobs.
•
“Mostly receive” specifies that most of the memory is set to receive fax jobs.
Cancel Faxes
Allow
Don't Allow
Specify whether or not the printer cancels fax jobs.
Note:
Allow is the factory default setting.
Fax number masking
Off
From left
From right
Specify the direction from where digits are masked in an outgoing fax number.
Notes:
•
Off is the factory default setting.
•
The number of characters masked is determined by the “Digits to mask”
setting.
Digits to Mask
0–58
Specify the number of digits to mask in an outgoing fax number.
Note:
0 is the factory default setting.
Enable Line Connected
Detection
On
Off
This will detect if a phone line is connected.
Summary of Contents for ineo 4020
Page 1: ...User s Guide ineo 4020 ...
