Develop ineo 4020 User Manual Download Page 341

Page: 341 / 365

User's Guide

- 341 -

Cannot send or receive a fax

Action

Yes

Step 1

Check if an error or status message appears on the display.

Is there an error or status message on the display?

Clear the error

or status

message.

Go to step 2.

Step 2

Check if the power cord is plugged into the printer and a

properly grounded electrical outlet.

Is the power cord plugged into the printer and a properly

grounded electrical outlet?

Go to step 3.

Connect the power cord to the

printer and a properly grounded

electrical outlet.

Step 3

Check the power.

Check if the printer is plugged in and turned on, and if

Ready

appears on the display.

Is the printer turned on, and does

Ready

appear on the

display?

Go to step 4.

Turn on the printer, and then wait

until

Ready

appears on the

display.

Step 4

Check the printer connections.

If applicable, check if the cable connections for the

following equipment are secure:

Telephone

Handset

Answering machine

Are the cable connections secure?

Go to step 5.

Securely connect the cables.

Summary of Contents for ineo 4020














































































































































































































































































































































































Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands

Develop ineo 4020, User Manual

Search results

Summary of Contents for ineo 4020

Reviews:

Related manuals for ineo 4020

Brands by name

Popular brands