Delta Electronics AC Motor Drive VFD-E, User Manual

Page: 163 / 363

Chapter 4 Parameters
|
4-110 Revision June 2008, 04EE, SW--PW V1.11/CTL V2.11
to lower the freqeuency command by PLC or the host controller. On the other hand, it can be
high-speed operation.
08.24
DEB Function
Factory Setting: 0
Settings 0 Disable
1 Enable
08.25
DEB Return Time
Unit: 1
Settings 0~250 sec Factory Setting: 0
The DEB (Deceleration Energy Backup) function is the AC motor drive decelerates to stop
after momentary power loss. When the momentary power loss occurs, this function can be
used for the motor to decelerate to 0 speed with deceleration stop method. When the power is
on again, motor will run again after DEB return time. (for high-speed axis application)
Status 1: Insufficient power supply due to momentary power-loss/unstable power (due to low
voltage)/sudden heavy-load
07-14
NOTE
DC BUS voltage
it doesn't need
multi-function terminals The level for DEB return time
(Lv=+30V+58V)
Lv level
Soft start relay at
power side
Output frequency
DEB return time
Pr.07-13 Decel. time selection for
momentary power loss
DEB function is activated
The level for soft start relay to be ON
(Lv+30)
When Pr.07-14 is set to 0, the AC motor drive will be stopped and won't re-start
at the power-on again.
Status 2: unexpected power off, such as momentary power loss