Dell OptiPlex GX50 User Manual Download Page 123

Page: 123 / 276

Installing Upgrades

121

CD Drives

CAUTION:

To avoid the possibility of electric shock, turn off the

computer and any devices, disconnect them from their electrical

outlets, and then wait 10 to 20 seconds before you open the
computer cover. Also, before you install a drive, see the other
precautions in “

Safety Instructions

.”

NOTICE:

To avoid possibly damaging the drive by electrostatic discharge

(ESD), ground yourself by touching an unpainted metal surface on the back of
the computer.

Unpack the drive and prepare it for installation.
Check the documentation that accompanied the drive to verify that

the drive is configured for your computer. Change any settings

necessary for your configuration.

If you are installing an IDE drive, configure the drive for the cable

select setting.
You usually configure a drive for cable select by setting a jumper or

switch, depending on the drive. For instructions on configuring the

cable select setting, see the documentation that accompanied the

drive.

Open the computer cover

If you are replacing a drive, disconnect the power and interface cables

from the back of the drive before you remove the drive.

Detaching CD Drive Cables

On the small form-factor computer, remove the interposer board from

the drive.

Summary of Contents for OptiPlex GX50





















































































































































































































































































Search results

Summary of Contents for OptiPlex GX50

Reviews:

Related manuals for OptiPlex GX50

Brands by name

Popular brands

Dell OptiPlex GX50, User Manual

Search results

Summary of Contents for OptiPlex GX50

Reviews:

Related manuals for OptiPlex GX50

Brands by name

Popular brands