Dell E525w User Manual Download Page 300

Page: 300 / 314

300

Troubleshooting

Protrudent/Bumpy Paper

Jam

Misfeed Jam

Action

Yes

Clean up the fusing unit.

Load one sheet of paper in the standard 150 sheet tray, and then print

a solid image all over paper.

Load the printed sheet with the side to be printed on facing down,

and then print a blank sheet of paper.

Is the problem recovered?

The task is complete.

Contact Dell.

Action

Yes

Ensure that paper is properly loaded in the standard 150 sheet tray.
Is the problem recovered?

The task is complete.

Proceed to the action

corresponding to the

type of the print media

being used:

• Thick - 2a
• Thin - 2b
• Envelope - 2c

If performing manual

duplex printing, go to

action 2d.
If using paper other

than the above or if not

performing duplex

printing, go to action

2e.

Use thick paper that is 163 g/m

or less.

Is the problem recovered?

The task is complete.

Go to action 3a.

Use thin paper that is 60 g/m

or more.

Is the problem recovered?

The task is complete.

Go to action 3a.

Ensure that the envelope is properly loaded in the standard 150 sheet

tray as instructed in "Loading Envelopes" on page 171.
Is the problem recovered?

The task is complete.

Go to action 3b.

Summary of Contents for E525w



























































































































































































































































































































Search results

Summary of Contents for E525w

Reviews:

Related manuals for E525w

Brands by name

Popular brands

Dell E525w, User Manual

Search results

Summary of Contents for E525w

Reviews:

Related manuals for E525w

Brands by name

Popular brands