•
Cleaner Status (current space reclamation process status)
•
Total Inodes (total number of data structures)
•
Dedupe Savings (deduplication storage savings by percentage)
•
Compression Savings (compression storage savings by percentage)
•
Total Savings (total storage savings by percentage)
For more information on DR Series system CLI commands, see the
Dell DR Series System Command Line Reference
Guide
.
Displaying Container-Specific Statistics Using the CLI
You can display the set of container-specific statistics by using the DR Series system CLI stats --container --name
<container name> command to show the following categories of statistics:
•
Container Name (name of the container)
•
Container ID (ID associated with container)
•
Total Inodes (total number of data structures in container)
•
Read Throughput (read throughput rate in Mebibytes or MiB/s for container)
•
Write Throughput (write throughput rate in MiB/s for container)
•
Current Files (current number of files in container)
•
Current Bytes (current number of ingested bytes in container)
•
Cleaner Status (current space reclamation process status for the selected container)
For more information on DR Series system CLI commands, see the
Dell DR Series System Command Line Reference
Guide
.
Managing Replication Operations
If you plan on performing replication operations across a firewall, the DR Series system replication service requires that
the following fixed TCP ports be configured to support replication operations:
NOTE: To allow replication storage information to be viewed by a corresponding data management agent (DMA),
the target DR Series system needs to reside in the same domain as the source DR Series system in the replication
relationship.
•
port 9904
•
port 9911
•
port 9915
•
port 9916
NOTE: If there are no existing containers, replication relationships, or any scheduled replication operations, the
only Replication-related option that is enabled is Create.
The DR Series system supports 64:1 replication of data (32:1 for DR4000/DR4100). This means that multiple source DR
Series systems (up to 64) can write data to different individual containers on a single, target DR Series system.
Replication can use up to 16 streams over a single port using one connection. For a definition of connections and
streams, see
Streams_vs_Connections
.
NOTE: The DR Series system software includes version checking that limits replication only between other DR
Series systems that run the same system software release version. If versions are incompatible, the administrator
will be notified by an event.
92
Summary of Contents for DR series
