Dell DR series Administrator'S Manual Download Page 163

Page: 163 / 188

Alert Message

Description/Meaning or Action

NVRAM does not match the data volume.

If this is a newly replaced NVRAM, use the maintenance --
hardware --reinit_nvram command to reinitialize the
NVRAM.
For more information, see the

Dell DR Series System

Command Line Reference Guide

Storage usage is approaching the system capacity.

Clean up the filesystem. If issue persists, contact Dell
Support for possible assistance or intervention.

Replication resync cannot proceed.

Namespace limit has reached its maximum.

Out of space on replication target.

Clean up the filesystem. If issue persists, contact Dell
Support for possible assistance or intervention.

The filesystem has reached the maximum allowable limit
for files and directories. Creating new files and
directories will be denied.

Clean up the filesystem. If issue persists, contact Dell
Support for possible assistance or intervention.

System Chassis Alerts

Power Supply <

number

> detected a failure.

•

Reconnect the power cable to the designated power

supply unit if it is disconnected.

•

Ensure that there is input AC power at the power

cable.

•

Use a different power cord.

If this does not resolve the issue, replace the designated
power supply.

Power Supply <

number

> is missing or has been removed. • The power supply might not be making a proper

connection.

•

Try reseating the power supply in the power supply

slot.

•

Reconnect the power cable to the designated power

supply unit if it is disconnected.

•

Ensure that there is input AC at the power cable.

•

Use a different power cord.

If this does not resolve the issue, replace the designated
power supply.

Power Supply <

number

> is unplugged.

•

Reconnect the power cable to the designated power

supply unit if it is disconnected.

•

Ensure that there is input AC power at the power

cable.

•

Use a different power cord.

Fan <

number

> failed.

•

Verify that the designated cooling fan is present and is

installed correctly.

•

Verify that the designated cooling fan spins up and

runs.

If this does not resolve the issue, replace the designated
cooling fan.

163

Summary of Contents for DR series





























































































































































































Search results

Summary of Contents for DR series

Reviews:

Related manuals for DR series

Brands by name

Popular brands

Dell DR series, Administrator'S Manual

Search results

Summary of Contents for DR series

Reviews:

Related manuals for DR series

Brands by name

Popular brands