manualshive.com logo in svg

Dell DR series, Administrator'S Manual

The Dell DR series offers a comprehensive solution for data protection and recovery. Ensure smooth operations with the Administrator's Manual, available for free download from manualshive.com, offering detailed instructions and insights for seamless usage. Discover the power of this user-friendly manual to maximize the potential of your DR series product.

Share
Download
background image

Installing the OST Plug-In for Backup Exec on Windows

..............................................................................144

Installing the OST Plug-In for NetBackup on Windows

.................................................................................144

Uninstalling the Dell OST Plug-In for Windows

............................................................................................. 145

Installing the OST Plug-In for NetBackup on Linux

........................................................................................146

Uninstalling the Dell OST Plug-In for Linux

.................................................................................................... 147

Configuring DR Series System Information Using NetBackup

.............................................................................147

Using NetBackup CLI to Add DR Series System Name (Linux)

......................................................................148

Using NetBackup CLI to Add DR Series System Name (Windows)

...............................................................148

Configuring NetBackup for the DR Series System

.........................................................................................148

Configuring NetBackup for Optimized Synthetic Backups

............................................................................ 149

Creating Disk Pools From LSUs

......................................................................................................................150

Creating Storage Units Using the Disk Pool

...................................................................................................150

Backing Up Data From a DR Series System (NetBackup)

....................................................................................151

Restoring Data From a DR Series System Using NetBackup

.........................................................................151

Duplicating Backup Images Between DR Series Systems Using NetBackup

...............................................151

Using Backup Exec With a DR Series System (Windows)

................................................................................... 152

OST Plug-In and Supported Versions

.............................................................................................................152

Installation Prerequisites for the OST Plug-In for Backup Exec

....................................................................152

Configuring the DR Series System Using the Backup Exec GUI

....................................................................152

Creating Backups on the DR Series System Using Backup Exec

..................................................................153

Optimizing Duplication Between DR Series Systems Using Backup Exec

.................................................... 154

Restoring Data from a DR Series System Using Backup Exec

...................................................................... 154

Understanding the OST CLI Commands

................................................................................................................155

Supported DR Series System CLI Commands for OST

................................................................................... 155

Understanding OST Plug-In Diagnostic Logs

....................................................................................................... 156

Rotating OST Plug-In Logs for Windows

........................................................................................................156

Collecting Diagnostics Using a Linux Utility

......................................................................................................... 156

Rotating OST Plug-In Logs for Linux

...............................................................................................................157

Guidelines for Gathering Media Server Information

............................................................................................ 157

NetBackup on Linux Media Servers

.............................................................................................................. 157

NetBackup on Windows Media Servers

........................................................................................................158

Backup Exec on Windows Media Servers

.....................................................................................................158

11 Troubleshooting and Maintenance....................................................................................161

Troubleshooting Error Conditions

.........................................................................................................................161

DR Series System Alert and Event Messages

......................................................................................................161

About the Diagnostics Service

............................................................................................................................. 179

Understanding Diagnostics Collection

...........................................................................................................179

About the DR Series System Maintenance Mode

................................................................................................180

Scheduling DR Series System Operations

............................................................................................................182

Creating a Cleaner Schedule

................................................................................................................................182

Displaying Cleaner Statistics

......................................................................................................................... 183

Summary of Contents for DR series





























































































































































































Reviews:

No comments

Related manuals for DR series

Para systems PRO500LCD User Manual preview
PRO500LCD
Brand: Para systems Pages: 14
Tripp Lite OMNIVSINT800 Specifications preview
OMNIVSINT800
Brand: Tripp Lite Pages: 5
Panduit smartzone 10-20KVA User Manual preview
smartzone 10-20KVA
Brand: Panduit Pages: 114
Tripp Lite SMART1200LCD User Manual preview
SMART1200LCD
Brand: Tripp Lite Pages: 12
SAI Canarias EA900RT G4 10KH User Manual preview
EA900RT G4 10KH
Brand: SAI Canarias Pages: 40
Omron S8BA-B120L Instruction Manual preview
S8BA-B120L
Brand: Omron Pages: 2
multimatic MD-1000I User Manual preview
MD-1000I
Brand: multimatic Pages: 94
Tripp Lite UPS System AVRX750U Specifications preview
UPS System AVRX750U
Brand: Tripp Lite Pages: 5
Tripp Lite SUT20K Installation Instructions Manual preview
SUT20K
Brand: Tripp Lite Pages: 20
Cuppon SM1200 Quick Start Manual preview
SM1200
Brand: Cuppon Pages: 3
LEGRAND MIDDLE ATLANTIC NEXSYS User Manual preview
MIDDLE ATLANTIC NEXSYS
Brand: LEGRAND Pages: 50
Online USV ZINTO 1000 User Manual preview
ZINTO 1000
Brand: Online USV Pages: 42
Online USV YUNTO P 1250 User Manual preview
YUNTO P 1250
Brand: Online USV Pages: 54
KEHUA TECH BCS-B-H Series User Manual preview
BCS-B-H Series
Brand: KEHUA TECH Pages: 96
OmniPower Eishbox 426 User Manual preview
Eishbox 426
Brand: OmniPower Pages: 8
CyberPower HSTP3T100KE User Manual preview
HSTP3T100KE
Brand: CyberPower Pages: 80
Eaton Ellipse MAX 600 Installation And User Manual preview
Ellipse MAX 600
Brand: Eaton Pages: 7
MGE UPS Systems Evolution 2000 RT 2U Installation And User Manual preview
Evolution 2000 RT 2U
Brand: MGE UPS Systems Pages: 22

Brands by name

Popular brands

Load more brands