Dell Dimension 4600 Series Owner'S Manual Download Page 94

Page: 94 / 148

A d d i n g Pa r t s

www

.dell.com | support.dell.com

Reattach the front panel to the side hinges, and then rotate it until it snaps onto the
front of the computer.

Replace the computer cover (see page 99).

NOTICE:

To connect a network cable, first plug the cable into the network wall jack and then

plug it into the computer.

Connect your computer and devices to electrical outlets, and then turn them on.

See the documentation that came with the drive for instructions on installing any
software required for drive operation.

front panel

side hinges (3)

J2936bk0.book Page 94 Tuesday, September 2, 2003 3:06 PM

Summary of Contents for Dimension 4600 Series





















































































































































Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands

Dell Dimension 4600 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands