Dell Dimension 4600 Series Owner'S Manual Download Page 92

Page: 92 / 148

A d d i n g Pa r t s

www

.dell.com | support.dell.com

Pull the two front-panel tabs towards you, and then push out the front-panel insert.

Ensure that the jumper setting on the new drive is set for "cable select" (see the
documentation that came with the drive for information).

Remove two extra alignment screws, shown in the illustration on page 93, from the
front of the computer and insert them into the drive.

NOTE:

Some computers come with only two extra alignment screws; others come with four. You

only need two alignment screws for this procedure.

tabs (2)

insert

drive

alignment screws (2)

J2936bk0.book Page 92 Tuesday, September 2, 2003 3:06 PM

Summary of Contents for Dimension 4600 Series





















































































































































Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands

Dell Dimension 4600 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands