Dell Dimension 4600 Series Owner'S Manual Download Page 93

Page: 93 / 148

A d d i n g Pa r t s

Gently slide the drive into place.

Once the drive is in place, apply pressure to ensure that the drive is fully seated.

Use the securing screw that came with the drive to attach the drive to the computer.

NOTICE:

Match the colored strip on the cable with pin 1 on the drive (pin 1 is marked as "1").

Connect the power cable to the system board.

Locate the data cable from the CD or DVD drive in the upper drive bay and connect
its middle data connector to the new drive.

Check all cable connections, and then fold the cables out of the way to provide airflow
for the fan and cooling vents.

drive

alignment screws (2)

securing
screw

extra alignment
screws (2 or 4)

J2936bk0.book Page 93 Tuesday, September 2, 2003 3:06 PM

Summary of Contents for Dimension 4600 Series





















































































































































Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands

Dell Dimension 4600 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands