Dell Dimension 4600 Series Owner'S Manual Download Page 81

Page: 81 / 148

A d d i n g Pa r t s

Removing an AGP Card

Press the card lever toward the PCI connector.

Pull the card up and out of the card clip.

Installing an AGP Card

To add or replace the card, press the card lever toward the PCI connector and gently
press the card into the AGP connector until it clicks into place.

Release the card lever, ensuring that the tab fits into the notch on the front end of the
card.

tab

card clip

lever

notch

PCI connector

AGP connector

back of computer

card clip
lever

AGP card

card clip

slot connector

J2936bk0.book Page 81 Tuesday, September 2, 2003 3:06 PM

Summary of Contents for Dimension 4600 Series





















































































































































Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands

Dell Dimension 4600 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands