A d v a n c e d Tr o u b l e s h o o t i n g
65
Enabling System Restore
If you reinstall Windows XP with less than 200 MB of free hard-disk space available, System
Restore is automatically disabled. To see if System Restore is enabled:
1
Click the
Start
button and click
Control Panel
.
2
Click
Performance and Maintenance
.
3
Click
System
.
4
Click the
System Restore
tab.
5
Ensure that
Turn off System Restore
is unchecked.
Resolving Software and Hardware
Incompatibilities
Windows XP IRQ conflicts occur if a device either is not detected during the operating
system setup or is detected but incorrectly configured.
To check for conflicts on a computer running Windows XP:
1
Click the
Start
button and click
Control Panel
.
2
Click
Performance and Maintenance
and click
System
.
3
Click the
Hardware
tab and click
Device Manager
.
4
In the
Device Manager
list, check for conflicts with the other devices.
Conflicts are indicated by a yellow exclamation point (
!
) beside the conflicting device
or a red
X
if the device has been disabled.
5
Double-click any conflict to display the
Properties
window.
If an IRQ conflict exists, the
Device
status area in the
Properties
window reports the
cards or devices that share the device's IRQ.
6
Resolve conflicts by reconfiguring the devices or removing the devices from the
Device
Manager
.
To use the Windows XP Hardware Troubleshooter:
1
Click the
Start
button and click
Help and Support
.
2
Type
hardware troubleshooter
in the
Search
field and click the arrow to start the
search.
J2936bk0.book Page 65 Tuesday, September 2, 2003 3:06 PM
