Dell Dimension 4600 Series Owner'S Manual Download Page 64

Page: 64 / 148

A d v a n c e d Tr o u b l e s h o o t i n g

www

.dell.com | support.dell.com

NOTICE:

Before you restore the computer to an earlier operating state, save and close all open

files and close all open programs. Do not alter, open, or delete any files or programs until the
system restoration is complete.

Click the

Start

button, point to

All Programs

→

Accessories

→

System Tools

, and then

click

System Restore

Ensure that

Restore my computer to an earlier time

is selected and click

Click a calendar date to which you want to restore your computer.

The

Select a Restore Point

screen provides a calendar that allows you to see and select

restore points. All calendar dates with available restore points appear in bold.

Select a restore point and click

If a calendar date has only one restore point, then that restore point is automatically
selected. If two or more restore points are available, click the restore point that you
prefer.

Click

The

Restoration Complete

screen appears after System Restore finishes collecting

data and then the computer restarts.

After the computer restarts, click

To change the restore point, you can either repeat the steps using a different restore
point, or you can undo the restoration.

Undoing the Last System Restore

NOTICE:

Before you undo the last system restore, save and close all open files and close all

open programs. Do not alter, open, or delete any files or programs until the system restoration is
complete.

Click the

Start

button, point to

All Programs

→

Accessories

→

System Tools

, and then

click

System Restore

Click

Undo my last restoration

and click

Click

The

System Restore

screen appears and the computer restarts.

After the computer restarts, click

J2936bk0.book Page 64 Tuesday, September 2, 2003 3:06 PM

Summary of Contents for Dimension 4600 Series





















































































































































Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands

Dell Dimension 4600 Series, Owner'S Manual

Search results

Summary of Contents for Dimension 4600 Series

Reviews:

Related manuals for Dimension 4600 Series

Brands by name

Popular brands