Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual Download Page 230

Page: 230 / 248

230

Appendix

The following information is provided on the device or devices covered in this

document in compliance with the FCC regulations:

• Product name: Dell™ Latitude™ XT
• Model number: PP12S
• Company name:

Dell Inc.

Worldwide Regulatory Compliance & Environmental Affairs

One Dell Way

Round Rock, TX 78682 USA

512-338-4400

NOTE:

For further regulatory information, see your

Product Information Guide

Macrovision Product Notice

This product incorporates copyright protection technology that is protected

by method claims of certain U.S. patents and other intellectual property

rights owned by Macrovision Corporation and other rights owners. Use of this

Corporation, and is intended for home and other limited viewing uses only

unless otherwise authorized by Macrovision Corporation. Reverse engineering

or disassembly is prohibited.

book.book Page 230 Tuesday, May 13, 2008 5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands