Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual Download Page 213

Page: 213 / 248

Media Base (Optional)

213

Lift the back of the Tablet-PC up and slide the Tablet-PC out towards the

back of the media base.

Installing the Optical Drive in the Media Base

Save and close any open files or programs, and turn off the Tablet-PC (see

"Turning Off Your Tablet-PC" on page 155).

Insert the optical drive into the media bay on the media base (see "Left

View" on page 203).

Insert the securing screw that holds the optical drive in place.

Turn on the Tablet-PC.
The operating system recognizes the new drive.

Removing the Optical Drive From the Media Base

Save and close any open files or programs, and turn off the Tablet-PC (see

"Turning Off Your Tablet-PC" on page 155).

book.book Page 213 Tuesday, May 13, 2008 5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands