Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual Download Page 173

Page: 173 / 248

Adding and Replacing Parts

173

Slide the card at a 45-degree angle out of its connector.

Installing a Mini-Card

NOTICE:

To avoid damaging the Mini-Card, never place cables on top of or under

the card.

NOTICE:

The connectors are keyed to ensure correct insertion. If you feel

resistance, check the connectors and realign the card.

NOTE:

Depending on the type of Mini-Card you have, not all cables may be in use.

NOTE:

Do not insert a Mobile Broadband (WWAN) network adapter into the WLAN

card connector, or vice-versa.

NOTE:

The Mini-Card may have two or three connectors, depending on the type of

card you ordered.

Move any cables out of the way to make space for the Mini-Card.

metal securing tabs (2)

Mini-Card

book.book Page 173 Tuesday, May 13, 2008 5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands