manualshive.com logo in svg

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

The Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz is a reliable and powerful device perfect for professional use. To make the most of its features, users can download the comprehensive User Manual for free from manualshive.com. This manual provides step-by-step instructions and valuable insights to enhance the user experience.

Share
Download
background image

Adding and Replacing Parts

177

 

NOTE: 

Lift the keyboard carefully in 

step 4

 to ensure that you do not pull on the 

keyboard cable.

4

Rotate the keyboard up 45-degrees to gain access to the keyboard 

connector.

5

Lift the keyboard cable locking arm up to access the keyboard cable. Pull 

up on the keyboard cable pull-tab to remove the keyboard cable from the 

connector. (Do not pull on the keyboard cable pull-tab to disengage the 

locking arm. This will damage the connector and or the keyboard cable.)

6

Lift the connector locking arm up to access the track stick cable. Pull up on 

the track stick cable pull-tab to remove the track stick cable from the 

connector. (Do not pull on the track stick cable pull-tab to disengage the 

connector locking arm. This will damage the connector and or the 

keyboard cable.) 

7

Lift the keyboard from the computer and place it to one side.

Installing the Keyboard 

 

NOTE: 

When you replace the keyboard, ensure that the keyboard tabs are 

completely in place to avoid scratching the palm rest.

1

Slip the track stick cable into the track stick cable connector on the system 

board and press the track stick-cable locking arm down to hold the cable in 

place. Use the pull-tabs on the track stick cable to install the track stick 

cable into the connector. 

2

Insert the keyboard cable into the keyboard cable connector on the system 

board and press the keyboard-cable locking arm down to hold the cable in 

place. Use the pull-tabs on the keyboard cable to install the keyboard cable 

into the connector. 

3

Holding the keyboard at a slight angle, insert the four metal tabs of the 

keyboard into the four metal slots of the palm rest.

4

Tighten the two M2 x 3-mm screws at the top of the keyboard.

5

Install the hinge cover (see "Installing the Hinge Cover" on page 175).

Coin-Cell Battery

 

CAUTION: 

Before performing the following procedures, follow the safety 

instructions in your 

Product Information Guide

.

book.book  Page 177  Tuesday, May 13, 2008  5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Reviews:

No comments

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Acer Aspire E1-522 Quick Manual preview
Aspire E1-522
Brand: Acer Pages: 9
Gateway 400 Service Manual preview
400
Brand: Gateway Pages: 87
Gateway Solo 9300 Software Manual preview
Solo 9300
Brand: Gateway Pages: 8
Gateway P-171 Setup Manual preview
P-171
Brand: Gateway Pages: 1
Gateway T-6817c User Manual preview
T-6817c
Brand: Gateway Pages: 106
Razer Blade Pro RZ09-0287 User Manual preview
Blade Pro RZ09-0287
Brand: Razer Pages: 18
Acer Aspire V5-452G User Manual preview
Aspire V5-452G
Brand: Acer Pages: 87
Fujitsu Lifebook S7000 Series Troubleshooting Manual preview
Lifebook S7000 Series
Brand: Fujitsu Pages: 70
Fujitsu LifeBook S6420 Easy Manual preview
LifeBook S6420
Brand: Fujitsu Pages: 41
Fujitsu Lifebook S7010 User Manual preview
Lifebook S7010
Brand: Fujitsu Pages: 128
Fujitsu Lifebook S751 User Manual preview
Lifebook S751
Brand: Fujitsu Pages: 385
Fujitsu Lifebook S710 User Manual preview
Lifebook S710
Brand: Fujitsu Pages: 393
Fujitsu LifeBook S7110D User Manual preview
LifeBook S7110D
Brand: Fujitsu Pages: 43
HP Compaq 615 Specification preview
Compaq 615
Brand: HP Pages: 28
HP Compaq 334088-001 Startup Manual preview
Compaq 334088-001
Brand: HP Pages: 44
HP Compaq 8510w Quick Manual preview
Compaq 8510w
Brand: HP Pages: 41
HP Compaq 6530s Replacement Manual preview
Compaq 6530s
Brand: HP Pages: 32
HP Compaq 100 Reference Manual preview
Compaq 100
Brand: HP Pages: 61

Brands by name

Popular brands

Load more brands