Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual Download

Page: 60 / 248

Setting Up and Using Your Tablet-PC

can hold the pen in your right hand or use a right-hand finger to operate

the tablet buttons and display.

• Left-handed use:

Hold the Tablet-PC on your right forearm with your right hand on the grip.

You can hold the pen in your left hand, manipulate the scroll control and

back buttons with your left hand, or use a left-hand finger to operate the

tablet buttons and display.

book.book Page 60 Tuesday, May 13, 2008 5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands