Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual Download Page 211

Page: 211 / 248

Media Base (Optional)

211

Docking Your Tablet-PC to the Media Base

NOTE:

If you are docking your Tablet-PC for the first time and have not completed

the steps in "Setting Up Your Media Base" on page 209, complete them before

proceeding to the next step.

NOTE:

After docking the Tablet-PC for the first time, the Tablet-PC battery or the

Tablet-PC AC adapter connection can power the media base if the media base is

not connected to an AC adapter.

NOTE:

Your Tablet-PC should be turned off when you dock it to the media base for

the first time.

Ensure that your Tablet-PC is turned off if this is the first time it is being

docked to the media base.

Align the back of the Tablet-PC with the back of the media base at an

approximately 30-degree angle, and lower the front of the Tablet-PC onto

the media base.

Tablet-PC

media base

book.book Page 211 Tuesday, May 13, 2008 5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands