Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual Download Page 182

Page: 182 / 248

182

Adding and Replacing Parts

Lift the display assembly from the base, and place the display assembly to

one side.

Installing the Display Assembly

Place the display assembly on the base.

Feed the Mini-Card antenna cables from the top through the antenna

channel to the bottom of the system.
Align the shrink tube that is wrapped around the antenna cables to the

edge of the palm rest. Make sure the antenna cables are flat (contained

within the recessed area) and do not overlap. Secure the antenna cables

with the tape that was removed from the cables when removing the display

assembly.

NOTE:

If the cables do not lie flat in the recessed area or if they overlap the palm

rest, then the keyboard will not sit flat on the palm rest.

M2.5 x 5-mm screws (2)

book.book Page 182 Tuesday, May 13, 2008 5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands