Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual Download Page 192

Page: 192 / 248

192

Adding and Replacing Parts

Remove the hinge cover (see "Removing the Hinge Cover" on page 174).

Remove the display assembly (see "Removing the Display Assembly" on

page 179).

Remove the keyboard (see "Removing the Keyboard" on page 176).

Remove any installed Mini-Cards (see "Removing a Mini-Card" on

page 171).

Remove the palm rest (see "Removing the Palm Rest" on page 186).

Remove the system board (see "Removing the System Board" on

page 189), and place it upside-down on a clean work surface.

Disconnect the fan cable from the system board.

Using a #0 Phillips screwdriver, remove the four M2 x 3-mm screws, and

lift the fan from the system board.

book.book Page 192 Tuesday, May 13, 2008 5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands