Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz User Manual Download Page 168

Page: 168 / 248

168

Adding and Replacing Parts

NOTICE:

To prevent damage to the system board, remove the main battery before

you service the Tablet-PC.

Removing the Memory and Mini-Card Cover

Follow the procedures in "Before You Begin" on page 155.

Turn the Tablet-PC upside-down, loosen the two captive screws on the

memory and Mini-Card cover, and remove the cover.

Installing the Memory and Mini-Card Cover

Follow the procedures in "Before You Begin" on page 155.

Turn the Tablet-PC upside-down, fit the cover into place, and tighten the

two captive screws on the memory and Mini-Card cover.

Memory

You can increase your Tablet-PC memory by installing memory modules on

the system board. See "Specifications" on page 42 for information on the

memory supported by your Tablet-PC. Install only memory modules that are

intended for your Tablet-PC.

book.book Page 168 Tuesday, May 13, 2008 5:03 PM

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

























































































































































































































































Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands

Dell blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz, User Manual

Search results

Summary of Contents for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Reviews:

Related manuals for blcwxfg - Latitude XT - Core 2 Solo 1.06 GHz

Brands by name

Popular brands