Datakom D-700 MK3, User Manual

Page: 155 / 218

D-700 MK3 User Manual Firmware V-16.8
- 155 -
Parameter Definition Factory Set Description
V3 Security Level AuthPriv
This is the parameter to enable authentication based
on SHA or MD5.
V3 Authentication
Algorithm
SHA This is the parameter to define authentication method.
V3 Encryption
Algorithm
DES This is the parameter to define encryption method.
V3 Authentication
Password
12345678 This is the password to authenticate snmp v3.
V3 Encryption
Password
12345678 This is the password to encrypt snmp v3.
V3 Username datakom This is the username to configure snmp v3.
V3 Context Name -
This is the parameter to specify the name of the
context.
Community public Authentication password of get request.
Community Write private Authentication password of set request
Community Trap public Authentication password of trap messages
Trap Destination 1 IP 0.0.0.0 Destination IP address 1 to send trap messages
Trap Destination 2 IP 0.0.0.0 Destination IP address 2 to send trap messages
Trap Destination 3 IP 0.0.0.0 Destination IP address 3 to send trap messages
Trap Destination 4 IP 0.0.0.0 Destination IP address 4 to send trap messages
Trap Version V3
This is the parameter to define snmp version of trap
messages.
Trap Destination 1
Enabled
1
This is the parameter to enable trap 1 destination
address
Trap Destination 2
Enabled
1
This is the parameter to enable trap 2 destination
address
Trap Destination 3
Enabled
1
This is the parameter to enable trap 3 destination
address
Trap Destination 4
Enabled
1
This is the parameter to enable trap 4 destination
address
17.19. SNMP PARAMETERS