Datakom D-700 MK3, User Manual

Page: 105 / 218

D-700 MK3 User Manual Firmware V-16.8
- 105 -
To enter the program mode , press together
◄
MENU and MENU
►
buttons for 5 seconds.
When the program mode is entered, below password entry screen will be displayed.
A 4 digit password must be entered using
▼, ▲
, MENU
►
and
◄
MENU buttons.
The
▼, ▲
buttons modify the value of the current digit. The MENU
►, ◄
MENU buttons navigate
between digits.
The unit supports 3 password levels. The level_1 is designed for field adjustable parameters. The level_2
is designed for factory adjustable parameters. The level_3 is reserved. It allows recalibration of the unit.
The password level-
1 is factory set to ‘
1234
’ and the password level-2 is factory set to ‘
9876
’.
If a wrong password is entered, the unit will still allow access to the program parameters, but in read-only
mode.
If pa
ssword “0000” is entered, only EVENT LOG file will be available.
Passwords are not front panel adjustable.
16.2. ENTERING THE PROGRAMMING MODE
Press 2
buttons
for 5
seconds