Datakom D-700 MK3, User Manual

Page: 169 / 218

D-700 MK3 User Manual Firmware V-16.8
- 169 -
The electronic engine fault codes are displayed in text within the alarm list table, together with their SPN-
FMI codes
. The complete list of fault codes is given in the engine manufacturer’s user manual.
Below is a basic list of fault conditions (x denotes any FMI)
SPN FMI DESCRIPTION
56 x Overspeed shutdown
57 x Low oil pressure shutdown
58 x High engine temp. shutdown
71 x Gain adjust potentiometer fault
75 x Generator speed circuit fault
79 x Frequency adjust potentiometer fault
80 x Droop adjust potentiometer fault
81 x Low oil pressure warning
82 x High engine temp. warning
91 x Accelerator pedal circuit fault
94 x Fuel filter restriction
Fuel pressure sensor fail
97 x Water in Fuel
99 x Oil filter differential pressure fault
98 x Low oil level, High oil level, Oil level sensor fail
100 x Low oil pressure, Oil pressure sensor fail
101 x Crankcase pressure fault
102 x Intake manifold 1 pressure fault
103 x Turbocharger 1 speed fault
105 x Intake manifold temp high, Intake manifold temp
sensor fail
106 x High boost pressure, Turbo outlet pressure sensor
fail
107 x Air filter restriction, Air filter sensor fail
108 x Atmospheric pressure sensor fail
109 x Coolant pressure fault
110 x High coolant temperature, Coolant temperature
sensor fail
111 x Low coolant level, Coolant level sensor fail
153 x Crankcase ventilation fault
158 x Battery voltage failure
164 x High injector activation pressure, Injector activation
pressure sensor fail
168 x Battery 1 voltage fault
172 x High inlet air temperature, High inlet manifold air
temperature, Inlet manifold air temperature sensor
fail
173 x Exhaust gas temp. fault
174 x High fuel temperature, Fuel temperature sensor fail
175 x High oil temperature, Oil temperature sensor fail
190 x Overspeed, Speed sensor loss of signal, Speed
sensor mechanical failure