Datakom D-700 MK3, User Manual

Page: 152 / 218

D-700 MK3 User Manual Firmware V-16.8
- 152 -
Parameter Definition Unit Min Max
Factory
Set
Description
Voltage Up/Down
Pulse Maximum Duration
msec 0 2000 0
This parameter defines the maximum
pulse width in voltage pulse control mode.
If this parameter is set to zero then no
maximum pulse width is used.
Voltage Up/Down
Pulse Delay
msec 20 1000 20
This parameter defines the minimum
pulse delay between two of voltage
up/down control pulses.
Return to Mid-Point - 0 1 0
This parameter controls the
“Return to
Mid-
point” output relay function.
0: no return to mid-point output
1: return to mid-point output active during
stop timer.
Reactive Load Sharing
Pulse Period
msec 0 5000 10
In reactive load sharing, this is the period
between two voltage up/down pulses.
Reactive Load Sharing
Start Limit
% 0 100 0.0
This is the minimum reactive power
percentage in order to activate voltage
up/down pulses.