Pilot's Operating Handbook
Section 3
Emergency procedures
EASA Approved
Edition 0 - March 05, 2019
Rev. 0
Page 3.9.1
3.9
- Electrical system
BAT AMP
Indicates that battery current is over 50 A while on ground.
After starting the engine with airplane power, a battery charge over 50 amperes is
normal.
▲
CAUTION
▲
Do not take off if battery charge is over 50 A.
▲
If this indication remains steady at a high value :
It may be due to a battery or generation system failure.
End of procedure.
BAT OFF
Indicates that :
-
the SOURCE selector has been positioned on OFF or
-
the battery plug is disconnected
.
►
Fly the airplane
◄
1 -
SOURCE selector
OFF
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 -
SOURCE selector
BATT
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
If warning persists :
►
Land as soon as possible
◄
3 -
Airplane mains voltage
Monitor
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
End of procedure.
PIM - DO NOT USE FOR FLIGHT OPERATIONS