Pilot's Operating Handbook
Section 8
Handling, servicing and maintenance
Edition 0 - March 05, 2019
Rev. 0
Page 8.7.11
Passenger masks repacking instructions
▲
CAUTION
▲
Do not use oil or other petroleum based lubricants on passenger
oxygen mask or deployment container. Oil based lubricants are a fire
hazard in oxygen-rich environments.
Repacking procedures shall be performed by personnel familiar with
the instructions and warnings in this document. Improperly packed
masks can damage the masks or result in failure of the masks to
deploy.
▲
▲
WARNING
▲
Masks shall be repacked in an area free of oil, grease, flammable
solvents or other contaminants.
▲
1 -
Inspect and disinfect mask and deployment container with an aqueous solution
of Zephiran Chloride (Scott Aviation P/N 00-2572) or with disinfection cleaners
(EROS P/N SAN50). After disinfecting and thoroughly drying the mask, lightly
dust the outside of the facepiece with Neo-Novacite powder (Scott Aviation
P/N 00-736). Contamination can be removed with mild soap and water
solution.
2 -
Fold headstrap into facepiece. Pull lanyard cord out to side of facepiece so that
it does not interfere with repacking.
3 -
Lay reservoir bag on flat surface and smooth out wrinkles.
PIM - DO NOT USE FOR FLIGHT OPERATIONS
