D-Link xStack DGS-3600 Series, Cli Manual

Page: 79 / 431

xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
76
clear attack_log
Purpose Used to clear the switch history of attack log files.
Syntax clear attack_log {[unit <unit_id 1-12> | all]}
Description This command will clear the contents of the attack log of the Switch.
Parameters unit <unit_id 1-12> - Select the switch in the switch stack for which
to clear attack log files.
all – Entering this parameter will clear all attack log files in the
switch stack.
Restrictions Only administrator-level and operator-level users can issue this
command.
Example usage:
To clear the attack log
:
DGS-3627:5#clear attack_log
Command: clear attack_log
Success.
DGS-3627:5#
enable syslog
Purpose Used to enable the system log to be sent to a remote host.
Syntax enable syslog
Description The enable syslog command enables the system log to be sent to
a remote host.
Parameters None.
Restrictions Only administrator-level and operator-level users can issue this
command.
Example usage:
To the syslog function on the Switch:
DGS-3627:5#enable syslog
Command: enable syslog
Success.
DGS-3627:5#
disable syslog
Purpose Used to enable the system log to be sent to a remote host.
Syntax disable syslog
Description The disable syslog command disables the system log to be sent to a
remote host.
Parameters None.
Restrictions Only administrator-level and operator-level users can issue this
command.