xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
NOTE:
If the autoconfig function fails, the user will be prompted with a warning message and
the switch will not upload the configuration settings.
Upon booting up the autoconfig process is initiated, the console screen will appear similar to the example below. The configuration
settings will be loaded in normal order.
DGS-3627 Gigabit Ethernet Switch
Command Line Interface
Firmware: Build 2.40-B19
Copyright(C) 2008 D-Link Corporation. All rights reserved.
DGS-3627:5#download cfg_fromTFTP 10.41.44.44 c:\cfg\setting.txt
Command: download cfg_fromTFTP 10.41.44.44 c:\cfg\setting.txt
Connecting to server................... Done.
Download configuration................. Done.
The very end of the autoconfig process including the logout appears like this:
DGS-3627:5#disable authen_policy
Command: disable authen_policy
Success.
DGS-3627:5#
DGS-3627:5##-------------------------------------------------------------------
DGS-3627:5## End of configuration file for DGS-3627
DGS-3627:5#
**********
* Logout *
**********
NOTE:
With autoconfig enabled, the Switch ipif settings now define the Switch as a
DHCP client. Use the
show switch
command to display the new IP settings status.
disable autoconfig
Purpose
Use this to deactivate autoconfiguration from DHCP.
Syntax
disable autoconfig
Description
This instructs the Switch not to accept autoconfiguration instruction from the
DHCP server. This does not change the IP settings of the Switch. The ipif
settings will continue as DHCP client until changed with the config ipif
command.
Parameters None.
Restrictions
Only administrator-level and operator-level users can issue this command.
Example usage:
69
